DSLR design principles

Cross-section view of DSLR system:

1. 4-element lens
2. Reflex mirror
3. Focal-plane shutter
4. Image sensor
5. Matte focusing screen
6. Condenser lens
7. Pentaprism
8. Eyepiece

Cutaway of an Olympus E-30 DSLR

A DSLR cutaway diagram

A camera based on the single-lens reflex (SLR) principle uses a mirror to show in a viewfinder the image that will be captured. The cross-section (side-view) of the optical components of an SLR shows how the light passes through the lens assembly (1), is reflected into the pentaprism by the reflex mirror (which must be at an exact 45 degree angle) (2) and is projected on the matte focusing screen (5). Via a condensing lens (6) and internal reflections in the roof pentaprism (7) the image is projected through the eyepiece (8) to the photographer's eye. Focusing is either automatic, activated by pressing half-way on the shutter release or a dedicated AF button, as is mainly the case with an autofocusing film SLR; or manual, where the photographer manually focuses the lens by turning a lens ring on the lens barrel. When an image is photographed, the mirror swings upwards in the direction of the arrow, the focal-plane shutter (3) opens, and the image is projected and captured on the sensor (4), after which actions, the shutter closes, the mirror returns to the 45 degree angle, the diaphragm reopens, and the built in drive mechanism re-tensions the shutter for the next exposure. There is often a ring of soft material around the focusing screen, which helps to both cushion the impact of the mirror slapping up and helps seal the mirror box from light entering through the eye piece.^[1] Some high end cameras incorporate a shutter into the eyepiece to further eliminate light that may enter there during long exposures.

Phase-detection autofocus

The diagram shown here is an over-simplification in that it omits the sensors used to activate the drive for the autofocus system. Those sensors reside at the bottom of the mirror box. In such a system, the main mirror is slightly translucent in the center, which allows light to pass through it to a secondary mirror which reflects light to the sensors below.
DSLRs typically use a phase detection autofocus system. This method of focus is very fast, and results in less focus "searching", but requires the incorporation of a special sensor into the optical path, so it is usually only used in SLR designs. Digicams that use the main sensor to create a live preview on the LCD or electronic viewfinder must use contrast-detect autofocus instead, which is slower in some implementations.

 DSLR optical viewfinder vs. digital point-and-shoot camera LCD

Depending on the viewing position of the reflex mirror (down or up), the light from the scene can only reach either the viewfinder or the sensor. Therefore, many older DSLRs do not provide "live preview" (allowing focusing, framing, and depth-of-field preview using the display), a facility that is always available on digicams although today most DSLRs offer live view.
The advantages of an optical viewfinder are that it alleviates eye-strain sometimes caused by electronic view finders (EVF), and that it constantly shows (except during the time for the sensor to be exposed) the exact image that will be exposed because its light is routed directly from the lens itself. Compared to ordinary digital cameras with their LCDs and/or electronic viewfinders the advantage is that there is no time lag in the image; it is always correct as it is being "updated" at the speed of light. This is important for action and/or sports photography, or any other situation where the subject or the camera is moving too quickly. Furthermore, the "resolution" of the viewed image is much better than that provided by an LCD or an electronic viewfinder, which can be important if manual focusing is desired for precise focusing, as would be the case in macro photography and "micro-photography" (with a microscope).
Compared to some low cost cameras that provide an optical viewfinder that uses a small auxiliary lens, the DSLR design has the advantage of being parallax-free; that is, it never provides an off-axis view.

A disadvantage of the DSLR optical viewfinder system is that while it is used it prevents the possibility of using the LCD for viewing and composing the picture before taking it. Some people prefer to compose pictures on the display – for them this has become the de-facto way to use a camera. Electronic viewfinders may also provide a brighter display in low light situations, as the picture can be electronically amplified; conversely, LCDs can be difficult to see in very bright sunlight.

Digital single-lens reflex camera

Most digital single-lens reflex cameras (digital SLR or DSLR) are digital cameras that use a mechanical mirror system and pentaprism to direct light from the lens to an optical viewfinder on the back of the camera.
The basic operation of a DSLR is as follows: for viewing purposes, the mirror reflects the light coming through the attached lens upwards at a 90 degree angle. It is then reflected three times by the roof pentaprism, rectifying it for the photographer's eye. (Note that the diagram below incorrectly shows a non-roof pentaprism.) During exposure, the mirror assembly swings upward, the aperture narrows (if stopped down, or set smaller than wide open), and a shutter opens, allowing the lens to project light onto the image sensor. A second shutter then covers the sensor, ending the exposure, and the mirror lowers while the shutter resets. The period that the mirror is flipped up is referred to as "viewfinder blackout". A fast-acting mirror and shutter is preferred so as to not delay an action photo.
All of this happens automatically over a period of milliseconds, with cameras designed to do this 3–10 times per second.
DSLRs are often preferred by professional still photographers because they allow an accurate preview of framing close to the moment of exposure, and because DSLRs allow the user to choose from a variety of interchangeable lenses. Most DSLRs also have a function that allows accurate preview of depth of field.
Many professionals also prefer DSLRs for their larger sensors compared to most compact digitals. DSLRs have sensors which are generally closer in size to the traditional film formats that many current professionals started out using. These large sensors allow for similar depths of field and picture angle to film formats, as well as their comparatively high signal to noise ratio.
The term DSLR generally refers to cameras that resemble 35 mm format cameras, although some medium format cameras are technically DSLRs. [source:wiki]